How CM works

Customer Support

+421-2-5465-0242

send email >>

Online support - chat (bottom right)

Monitoring of the insides of PC, NB

Using exact methods, you can monitor all sorts of parameters indicating a defective HW on PC and NB (NoteBook) by using watches.

Setup of watches for HW monitoring is done after entering C-Monitor scheduler, in the section Watches, click on the wizard for adding a new watch.

Adding a watch for HW monitoring on PC

Image: Pridanie watchu pre HW monitoring na PC

In the next window, set what you want to be evaluated and enter default values, where e.g. the disk status is evaluated as OK and limit values, which when are exceeded, it'll cause an error message.

Selection of items for HW monitoring on computers, predefining the monitored values

Image: Voľba položiek pre sledovanie hw na počítačoch, preddefinovanie sledovaných hodnôt

After passing through the following windows of the wizard for adding a watch for HW monitoring, you'll get to the section displayed on the next image, where you have an option to define actions, which are going to be executed after the watch is evaluated into error state. For example, you can configure sending of SMS message informing about the error state.

Setup of action when the watch is switched to fail state, option to send SMS message

Image: Nastavenie akcie pri prechode watchu do stavu fail, možnosť odoslania sms správy

State of the particular conditions, as well as the watch's evaluation can be viewed anytime in the section Watch State.

Evaluation of the watch in the tab Watch State

Image: Vyhodnocovanie watchu v žáložke Watch State
Images: 
Pridanie watchu pre HW monitoring na PCVoľba položiek pre sledovanie hw na počítačoch, preddefinovanie sledovaných hodnôtNastavenie akcie pri prechode watchu do stavu fail, možnosť odoslania sms správyVyhodnocovanie watchu v žáložke Watch State